Anh Hùng giúp em giải bài này theo ACI 318-25 với ạ
A
rectangular concrete beam of width b
= 24 in. is limited by architectural considerations to a maximum total depth h = 16 in. It must carry a total
factored load moment M = 400 ft-kips.
Design the flexural reinforcement for this member, using compression steel if
necessary. Allow 3 in. to the center of the bars from the compression or
tension face of the beam. Material strengths are fy = 60,000 psi, and fc’
= 4000 psi. Select reinforcement to provide the needed areas, and show a sketch
of your final design, including stirrups
0
Thống kê diễn dàn
Diễn dàn hiện tại có tổng cộng 7,264 bài viết trong 1,858 chủ đề
Số thành viên đã kích hoạt 13,943 (trong đó có 534 VIP Member)
Chào mừng thành viên mới nhất của diễn đàn, dtxdvn